| Pigments: |
Titanium Rutile, High Performance imported additives, high quality minerals extenders |
| Binders: |
Styrine Acrylic |
| Dilution: |
Up to 30% by volume with clean potable water |
Artink shine plus exterior emulsion is based on special encapsulated technology that ensures the protection of the exterior walls from algal and fungal attacks and keep the walls fresh and bright.Artink shine plus exterior is durable and offers good hiding,spreading and extra shining.
Properties
| Colors: |
White, Light base |
| Texture of film: |
Satin Finish |
| Surface Dry: |
30 minutes to 40 minutes |
| Hard Dry: |
8 Hours |
| Recoating time: |
4 to 6 hours |
| Area coverage: |
120 to 140 sqft/ltr (depends on the surface finish) |
| Pack Size: |
1 ltr, 4 Ltrs, 10 Ltrs, 20Ltrs |
- Clean the surface with a wire brush and remove all loose paints, films,dust,grease,chalk ,algae and fungus.
- Remove all loose particles through thorough cleaning.
- Make sure that the holes and fine cracks are filled with Aarton Wall Putty.
- Sand the surface with emery paper 180 and 320, and apply. One coat of Aarton Wall Primer and allow it to dry for 6 to 8 hours.
Thin Artink shine plus exterior emulsion with 33% of potable water and apply 2-3 coats by brushing with a gap of 4-6 hours between the coats
